Spectrum Analyzer AT5011A + Tracking Generator

Barang Baru
Ready Stock

AT5000 series spectrum analyzer will exceed 1Ghz( 0.15~ 1050MHz) have the glancing or fine adjust center frequency with the 100KHz/ grid~ 100MHz/ grid span select, compose the simple frequency-domain. One 4 and 1/ 2 bit LED display can be selected for the center frequency and marking frequency reading.AT5011+ have a tracking generator, this instrument can be used to the pre-research testing. can detect the mobile phone’ s RF circuit’ s native signal, intermediate frequency, radiation signal etc. the spectrum analyzer is used to examine and repaired that mobile phone can’ t going the web, very conveniently and exactly.

§ Frequency range: 0.15~ 1050MHz

§ 4 and 1/ 2 digital displays. ( Center frequency, 0.1MHz resolution)

§ -100~ + 13dBm amplitude range, 20MHz, 400MHz center frequency span and 4 KHz video filter.

§ Tracking generator ( only the ATTEN5011+ )

§ Output amplitude : + 0~ -50dBm( 50© )

§ Specifications:

§ Frequency range: 0.15 to 1050MHz

§ Center frequency display accuracy: ± 100kHz

§ Marker accuracy: 0.1% spans 100 kHz

§ Resolution of frequency display: 100 kHz ( 4.5 digit LED)

§ Frequency scans width accuracy: ± 10%

§ Frequency stability: better than 150 kHz/ hour

§ IF Bandwidth ( -3dB) : 400 kHz and 20 kHz;

§ Video-Filter ( ON) : 4 kHz

§ Sweep rate: 43Hz

§ Amplitude range: -100dBm to + 13dBm

§ Screen display range: 80dB ( 10dB/ div.)

§ Reference level: -27dBm to + 13dBm ( in 10dB steps)

§ Reference level accuracy: ± 2dB

§ Average noise level: -90dBm ( 20 kHz Bandwidth)

§ Distortion: 3MHz apart)

§ Sensitivity: Better than -90dBm

§ Log scale fidelity: ± 2dB ( without attn.) 500MHz

§ Input attenuator: 0 to 40dB ( 4' 10dB steps)

§ Input attenuator accuracy: ± 1dB/ 10dB

§ Max. Input level: + 10dBm, ± 25V DC ( 0dB attn.) + 20dBm ( 40dB attn.)

§ Frequency scans width: 100 kHz/ div. to 100MHz/ div, in 1-2-5 steps and 0Hz/ div. ( Zero Scan)

kunjungi :

www.alatkomunikasi.com